SENTEC Sensor
SENTEC All Application
Others switch
Tokyo sensor – Foot Switch Type FS-111-B FS-111-G Color Black Gray Rated voltage AC/DC 5V～24V±10% Rated current 0.3A (resistive load) Insulating resistance 50MΩ or more (500VDC) Operating load Approx. 40N Voltage withstand 250VDC one minute Operating temperature range 0～50 C Weight 200g (with protection guard 1,600g) Lead wire VCTF 0.75mm2 1,500mm(length) Covering NBR(oil resistant rubber)…
Edge Switch – Tokyo sensor
Shock absorbing safety cover with tape switches. Transit sensor Sensing human body or object 1. Channel(frame support) Type EDB/Black, Yellow(30N)/Yellow(15N),Black(10N) (End caps are black) Door sensor Contact or collision sensing EHR(Black) Door sensor Contact or collision sensing ESU(Black, Red/End caps are black) Door sensor Contact or collision sensing 2. Non-Channel Type 3. Road Type ESB(Black) Door sensor…
Type of Tape Switch
Type of Tape Switch Emergency stop for machines and facilities. Avoiding injury accident. Security system Traffic sensing Door switch Tape Switches Type Tape switch – Standard Type LS-023(Light blue) Machine controling sensor Contact or collision sensin LM-025(Pastel red, White) Contact or collision sensing Door sensor LH-040(White, Red, Yellow) Contact or collision sensing Door sensor LP-120(Blue)…
Tape sensor & Edge sensor
Tape Switch, Tape Sensor – TOKYO SENSOR A tape switch works as a normally open momentary contact switch. Simple mechanism, and more available any length by your specification. TAPE SWITCH Structure TAPE SENSOR Mechanism The load applied to the center bead makes down the upper electrode. The upper electrode comes down and contacts with the…
Safety Mat controller – FSC4 series
Safety Mat controller – FSC4 series Easy to build a safety, own supervising system with our 4-lead wires type. FSC4-024 Power supply 24VDC±10% Output contact 1c250VAC4A, 24VDC4A (resistive load) Power consumption Approx. 4.1W Weight 350g FSC4-210 Power supply 100 to 240VAC±10% Output contact 1c250VAC4A, 24VDC4A (resistive load) Power consumption Approx. 5.2W Weight 400g
Safety Mat Switch Controller – FSC series
Safety Mat Switch Controller – FSC series Easy to install with our 2-lead wires or 4-lead wires type. Safety Mat controller – FSC-024 Power supply 24VDC±10% Output contact 1c250VAC4A, 24VDC4A (resistive load) Power consumption Approx. 2.2W Weight 470g Safety Mat controller – FSC-210 Power supply 100 to 240VAC±10% Output contact 1c250VAC4A, 24VDC4A (resistive…
Safety Mat controller unit
Use with tape switches, mat switches, and bumper switches, FSC Controller units enhance the safety of the systems. Introduction FSC Controller units not only work as relay units but supervise the status of the safety systems–detecting switch-on and disconnection. Either “Auto-reset” mode or “Manual reset” mode is set by the built-in switch. …
Safety Mat sensor
Standard and custom made – Safety mat switches. Tokyo Sensor’s Safety mat switches are durable and used for applications in securing danger zones, alarm systems for restricted areas, safety systems for machine tools, switching automatic doors, etc. They are available in defferent sizes and shapes. About MAT SENSOR (Switch) Specifications/Ratings Rated voltage ACDC 5-24V±10% Rated…
Tokyo Sensor
Tokyo Sensor. All Application