SUGAWARA Inspection of completed bearing

• Anderon Meter for miniature-small size ball bearing

  

  High-precision measurements of ball bearing vibrations

  The Anderon Meter rotates the bearing inner ring at a speed of 1,800 r/min and incorporates a speed sensor to detect radial vibrations of the outer ring, displaying them as Anderon values.

  Features

  • Capable of measuring small diameter high-performance bearings
  • Uses a Sugawara compact speed sensor with flat frequency profile for vibration detection
  • Can be used to measure bearings of different sizes simply by changing the arbor
  • Can be combined with an automated unit to configure an automated system
  • Compact, space-saving design

   

• Anderon Meter for medium-large size ball bearings ADM-512, ADM-705

  

  The ADM-512 Anderon meter drive unit is used for mediumdiameter ball bearings (bore diameter of 3 mm to external diameter of 100 mm), while the ADM-705 is used for largediameter ball bearings (external diameters ranging from 20 mm to 190 mm). The ADM-512 applies axial loads of up to 100 N,while the ADM-705 applies axial loads of up to 2,000N.

 

• Anderon Meter Automation Unit Single-Spindle Type

  The ADF-001 Parts Feeder can be combined with the Anderon meter drive unit to configure an automated system capable of high-precision measurements.

  

  Features

  • Performs measurements with the same high precision as manual systems.
  • The product can be mounted on the existing ADM-101 standard manual system to configure a low-cost automated system.
  • Measures the front and rear of bearings automatically at a cycle time of approximately 6 seconds, enabling approximately 15,000 units to be processed per day.
  • Compact, space-saving design

 

• Anderon Meter Automation Unit Twin-Spindle Type

  

  The Sugawara Automatic Anderon Meter (andero meter) is a high-speed automatic measuring machine that offers the same performance and precision as our acclaimed high-performance manual Anderon meter. By measuring the front and back sides of a bearing, this device ensures reliable quality inspection and also allows for a short tact time - just 1.5 seconds from intake to discharge of a workpiece.

  Main Features

  • Uses a high-precision measuring system equivalent to the one used in our acclaimed manual Anderon meter to enable highly reliable quality checking (measurement resolution of 0.1 Anderon or lower).
  • Incorporates a compact high-speed sensor with flat characteristics originally developed and manufactured by Sugawara for use in automatic equipment (10 times greater sensitivity than laser Doppler vibrometer).
  • Measures the front and back sides of a bearing concurrently to ensure reliable quality inspection.
  • Extremely short tact time of 1.5 seconds enables quality inspection of more than 60,000 bearings per day.
  • Compact desktop unit for space-saving installation.
  • Replaceable Arbor enables measurement of ball bearings of different sizes (compatible bearing outside diameter: 4 mm to 16 mm).
  • Independent transport unit for easy maintenance.