Tape Switch, Tape Sensor – TOKYO SENSOR A tape switch works as a normally open momentary contact switch. Simple mechanism, and more available any length by your specification. TAPE SWITCH Structure TAPE SENSOR Mechanism The load applied to the center bead makes down the upper electrode. The upper electrode comes down and contacts with the…
Safety Mat controller – FSC4 series Easy to build a safety, own supervising system with our 4-lead wires type. FSC4-024 Power supply 24VDC±10% Output contact 1c250VAC4A, 24VDC4A (resistive load) Power consumption Approx. 4.1W Weight 350g FSC4-210 Power supply 100 to 240VAC±10% Output contact 1c250VAC4A, 24VDC4A (resistive load) Power consumption Approx. 5.2W Weight 400g
Safety Mat Switch Controller – FSC series Easy to install with our 2-lead wires or 4-lead wires type. Safety Mat controller – FSC-024 Power supply 24VDC±10% Output contact 1c250VAC4A, 24VDC4A (resistive load) Power consumption Approx. 2.2W Weight 470g Safety Mat controller – FSC-210 Power supply 100 to 240VAC±10% Output contact 1c250VAC4A, 24VDC4A (resistive…
Use with tape switches, mat switches, and bumper switches, FSC Controller units enhance the safety of the systems. Introduction FSC Controller units not only work as relay units but supervise the status of the safety systems–detecting switch-on and disconnection. Either “Auto-reset” mode or “Manual reset” mode is set by the built-in switch. …
Standard and custom made – Safety mat switches. Tokyo Sensor’s Safety mat switches are durable and used for applications in securing danger zones, alarm systems for restricted areas, safety systems for machine tools, switching automatic doors, etc. They are available in defferent sizes and shapes. About MAT SENSOR (Switch) Specifications/Ratings Rated voltage ACDC 5-24V±10% Rated…
Tokyo Sensor. All Application
SRA FLAT SWIVEL UNITS Full Description ● Torque: 2 Nm ● Axial bearing load: 600N ● Types: SRA-90 – SRA-180 ● High flexibility, continuously adjustable rotation angle from 90ﾟ (-3 °) to 180 ° (3 °). ● Sensor location use compact design to reduce interference. ● Using rack and pinion power transmission…
SDV PRESSURE SAFETY VALVE MODULE Full Description ● Pressure safety valve special designed for grippers, save your trouble for connecting tubes. ● Types: SDV-01 – SDV-02 ● AB holes designed to ensure that the gripper can continue to work when the air is lost. ● Compact design, easy installation.
RSWS QUICK CHANGE FINGER SYSTEM Full Description ● RSWS quick change finger system. ● Manual quick change finger. ● Types: RSWS-A, repeatability of 0.02 mm. RSWS-B, repeatability of 0.05 mm. ● No need to recalibrate. ● Suitable for RGN-RZN, 8 models 50-300.
RZN-SD DUST PROTECTION MODULE FOR RZN Full Description ● Standard dust protection. ● Applicable to all RZN models. ● After installation , IP rating advanced to IP60. ● Permitted for using in dirty environments. ● Integrate with sensor mounting block, can use directly with non-contact sensor.