Tape Switch, Tape Sensor – TOKYO SENSOR
A tape switch works as a normally open momentary contact switch. Simple mechanism, and more available any length by your specification.
TAPE SWITCH Structure
TAPE SENSOR Mechanism
|
The load applied to the center bead makes down the upper electrode. |
The upper electrode comes down and contacts with the lower electrode. Consequently this tape switch turns “ON”. |
No load to the upper electrode causes it to be returned to the normal position. Then both electrodes detach. So the tape switch turns “OFF”. |
Specifications/Ratings
|
Rated voltage
|
ACDC 5-24V±10% |
|---|---|
| Rated current | 0.3A(resistive load) |
| Insulation registance | Over 500MΩ(@500 VDC) |
| Dielectric strength | 250VDC for 1 minute |
| Recommended operating temprature range | 0 to 50°C |
| Storage temperature range | 0 to 60°C |
| Storage Humaidity range | <55% RH(before terminal welding) <90% RH(after terminal welding) |
