Solarton Orbit® Confocal
Solartron Orbit® Confocal ith the compact size of a Solartron gauging probe and the flexibility of Solartron Metrology‘s Orbit® 3 Digital Measurement System. For applications where a contact gauging sensor is unsuitable, this is a cost efficient non-contact measurement solution that includes an adjustable light source, standoff distances and a small spot size.
| Confocal Head Type | ||
|---|---|---|
| Measurement Performance | C8H/8/1 | C8H/24/5 |
| Calibrated Range mm | 1 | 5 |
| Standoff (to start of measuring range) mm | 8 | 24 |
| Linearity (full range) (1) ±%FSO | 0.5 | 0.2 |
| µm | 5 | 10 |
| Linearity (Limited range) (2) ±%FSO | 0.25 | 0.1 |
| µm | 2.5 | 5 |
| Resolution µm | 1 | 1 |
| Repeatability (1) µm | 2 | 2 |
| Spot Diameter µm | 30 | 30 |
| Operating Angle ±° | 5 | 3 |
| Temperature Coefficient µm/°C | 2 | 2 |
| Environmental | ||
| Operating Temperature °C | 20 ±5 | |
| Storage Temperature °C | 10 to 50 | |
| Operating Humidity | Do not use controller in wet conditions | |
| Shock and Vibration | Do not expose controller to shock and vibration | |
| Electrical Interface | ||
| Power requirements | 24V DC from power pack provided | |
| Signal Interfaces | Orbit® 3 | |
| Reading Rate R/s | 4000 | |
| Bandwidth (Precision Mode) Hz | 10 | |
| Bandwidth (Normal Mode) Hz | 50 | |
| Functional | ||
| Light Output Level | 8 settings to accommodate different levels of reflective surfaces (set from touch screen or Orbit®) | |
| Exposure Settings | 5 ms to 100 ms to accommodate different levels of reflective surfaces (set from touch screen or Orbit®) | |
| Averaging | 1 to 64 set higher to improve signal to noise ratio | |
| Zero or Absolute | Displayed Readings only (set from touch screen) | |
| Menu | Touch Screen for setting up | |
| Indications | Displayed Measurement and Signal Strength | |
