Showa MLA*W pump.
These showa models are designed for centralized lubrication systems units utilizing the volumetric type system.
|
Showa MLB*W pump.
These showa models are designed for centralized lubrication systems units utilizing the volumetric type system.
|
Showa LCA3 Lubrication unit.
This showa lubrication unit combines MLB015W (or 03W) pump with a 4 or 6 liter reservoirs. These lubricators are also designed for a volumetric type system.
|
Showa LCA4 lubrication unit.
The basic Showa LCA4 centralized lubrication unit combines MLB015W (or 03W) pump with 2 or 4 liter plastic reservoir.
|
Showa LCB3 lubrication unit.
The Showa LCB3 lubrication unit is fitted with a die-casting aluminum 3.4 liter tank, cover and flange. Units with an IC timer can set their operating intervals.
|
Showa LCB4 lubrication unit.
The Showa LCB4 lubrication unit is supplied without IC timer. This unit combines a MLB01W2 pump with 2, 4 or 6 liter tank.
|
Showa LCB5 lubrication unit.
The Showa LCB5 lubrication unit is supplied with IC timer. This unit combines a MLB01W2 pump with 2, 4 or 6 liter tank.
|
Showa HP pneumatic lubrication unit.
The Showa HP*W* model is operated by compressed air. Designed for use with oil injectors.
|
Showa LAW manual pump.
The Showa LAW manual pump is designed for use in a volumetric lubrication system. Oil is dispensed by a pull of the lever.
|
Showa DPB1 piston distributor.
Utilizing the pump’s pressure the DPB piston distributors meter a pre-measured quantity of oil from each port. The discharge volumes are 0.03, 0.06, 0.10 and 0.16 cc/stroke.
|
Showa DPB2 piston distributor.
Utilizing the pump’s pressure the DPB piston distributors meter a pre-measured quantity of oil from each port. The discharge volumes are 0.1, 0.2, 0.4 and 0.6 cc/stroke.
|
Showa DPB2L piston distributor.
Utilizing the pump’s pressure the DPB piston distributors meter a pre-measured quantity of oil from each port. All models come with visual indicator. The discharge volumes are the same as DPB2 models.
|
Showa DPB3 piston distributor.
Utilizing the pump’s pressure the DPB piston distributors meter a pre-measured quantity of oil from each port. The discharge volumes are 0.2, 0.4, 0.6, 1.0 and 1.5 cc/stroke.
|
Showa DSA piston distributor.
A pre-measured volume is distributed utilizing the power of the internal spring. The discharge volumes are 0.1, 0.2, 0.5 and 1.0 cc/stroke.
|
Showa DSAL piston distributor.
A pre-measured volume is distributed utilizing the power of the internal spring. All models come with a visual indicator. The discharge volumes are the same as DSA units.
|
Showa DSB piston distributor.
A pre-measured volume is distributed utilizing the power of the internal spring. The discharge volumes are 0.1, 0.2, 0.5 and 1.0 cc/stroke.
|
Showa DSBL piston distributor.
A pre-measured volume is distributed utilizing the power of the internal spring. All models come with a visual indicator. The discharge volumes are the same as DSB units.
|
Showa DSZ piston distributor.
A pre-measured volume is distributed utilizing the power of the internal spring. All models come with a visual indicator. The discharge volumes are 0.03, 0.05, 0.08 and 0.1 cc/stroke.
|
.gif)
.gif)
