ITOH DENKI – Power Moller
“ITOH DENKI” is the world leader of Motor roller, Power Moller, Motorised conveyor roller and transfer drums. Its know on “Motor Roller”, “Drum with AC Power Moller” and Drum with DC Power Moller” that suite for conveyor roller & transfer roller in process.
> ITOH DENKI PowerMoller structure
ITOH DENKI – AC Power Moller ( AC Roller)
Features:
• Designed for slim and compact lines.
• Easy installation into existing conveyors.
• Simplifies new conveyor design.
• Easy control of forward, reverse and stop.
• Includes Terminal Block. -www.tjsolution.com
Option : 
ITOH DENKI offers various of options that make more powerfull to your Power Moller®. Such as Rubber Lagging prevent light loads from slipping, Built-in-Break eliminate load inertia and enable precise stopping, Clutching when power is “on” Power Moller® functions normally if it “off” Power Moller® functions as an idler roller, Water Proof designed for outdoor lines or lines subject to water spray (washdown), Drip Proof used on conveyor lines that are located in areas with high moisture levels, Dust Proof used in dusty or powdery environments. Rubber seals protect the POWER MOLLER® bearings from contamination, Belt Pulley and Groove are available with a special end cap or grooves to accommodate small V-belts or round belts. Please ask our Power Moller’s expert before you purchase.
How to select Power moller model.
|
Model Type |
Power Moller |
|
Diameter roller |
38, 42.7, 48.6, 50, 57, 60.5, 63.5 and 76.3 mm. |
|
Type of motor |
AC Standard motor or accumulate type, DC Standard type : Brush type , Brushless type |
|
Speed |
4 – 60 m/min. (depend on model) |
|
Tube lenght |
Variuos lenght of powermoller -www.tjsolution.com |
|
Voltage Type |
1 Phase, 3 Phase |
|
Apply voltage |
AC : 100, 110, 115, 200, 220, 240 V. / DC : 24 V. |
|
Option |
Rubber lagging, break, clutch, water proof, dip proof, dust proof, belt&groove |
PM380AS, PM427AS, PM486BS, PM570AS, PM570BP, PM570AU, PM605AS, PM605BP, PM605AU, PMT50AS, PM763BS, IP-G
PM486FS, PM486FE, PM486FP, PM486FH, PM486FX, PM486XE/XP, PM570FE, PM605FE, PM635FS -www.tjsolution.com
Terminal block
A-200, A-270/80-GS, A-800, E-920, A-B70/80-G -www.tjsolution.com
Driver and Hybrid card
CB-002, CB-005, CB-016S2, CB-016S4, CB-030 -www.tjsolution.com
The Itoh Denki Power Moller® saves space and decreases the weight of the conveyor frames. These points are always examined when motorizing transfers such as lift tables or t-junctions.
The motorization of the gate in order to allow the operators to cross a conveyor line will be easy to manufacture thanks to the Power Moller®.
For more information about ITOH DENKI, power moller please contact our roller transfer engineer.
