LCD Display Fiber optic sensor sensitivity
status is visible
Anti Mutual interference.Ease of installation
Wide range of usage
Self diagnosis.
Will the sensor be okay after starting the
oparation?
Even after continuos oparation for 24 hours,
if the oparation becomes “unstable” the stability
output is generated. Convenient for maintenance.
Model
NPN type
F70R
F70G
F70B
PNP type
F70RPN
F70GPN
F70BPN
Detection
Through beam/Refrection(by fiver unit)
Range
Depending on fiber unit
Power supply
12-24VDC ±10% Ripple 10% or less
Current consumpion
NPN type : 39mA or less PNP type : 50mA or less
Out
mode
Output
Open collector
NPN : Rated : Sink current 100mA(30VDC) Max.Residual voltage : 1V or less
PNP : Rated : Source current 100mA(30VDC) Max.Residual voltage : 2V or less
Stability
Output
Open collector
NPN : Rated : Sink current 50mA(30VDC) Max.Residual voltage : 1V or less
PNP : Rated : Source current 50mA(30VDC) Max.Residual voltage : 2V or less
Oparation mode
Light-On/Dark-On selectable
Timer
On delay/Off delay/On-Off delay/non-delay selectable
Timer time : 10/20/40/60/80/100/120ms. selectable 40ms.set at factory
External teaching input
Non voltage(contact/non-contact)
Response time
Transmission frequency Channel 1: 500µs. or less
Channel 2: 600µs. or less
Light source
(wave length)
Red LED
(660nm)
Green LED
(565nm)
Blue LED
(470nm)
Indicator
Oparation indicator : Orange LED , Stability indicator : Green LED
LCD Display Fiber optic sensor sensitivity
