Showa MLA gear pump.
These showa pumps are designed for continuous circulating oil distribution in resistance type systems. Flow rates up to 10 l/min.
|
Showa MLC gear pump.
These showa pumps are compact and light version. They are also designed for continuous circulating oil distribution in resistance type systems.
|
Showa MLD gear pump.
These showa pumps are compact and light version. They are also designed for continuous circulating oil distribution in resistance type systems.
|
Showa YMAS piston pump.
The Showa YMAS piston pump is a resistance type automatic lubricator pump unit, available in various cycle times with adjustable output volumes.
|
Showa YMB piston pump.
The showa YMB piston pump is a resistance type automatic lubricator pump unit, available in various cycle times with adjustable output volumes.
|
Showa SMA piston pump.
The showa SMA piston pump is a resistance type automatic lubricator pump unit, available in various cycle times with adjustable output volumes.
|
Showa SMD piston pump.
The showa SMD piston pump is a resistance type automatic lubricator pump unit, available in various cycle times with adjustable output volumes.
|
Showa SSMA piston pump.
The showa SSMA piston pump is a resistance type automatic lubricator pump unit, available in various cycle times with fix output volume.
|
Showa MY6 accumulator pump.
By utilizing an IC timer the MY6 pump can be set to discharge oil from a wide range of selectable times.
|
Showa MV continuous pump.
The showa MV model is an automatic pump enables continuous lubrication within a resistance type system. There are two discharge volume types available.
|
Showa LA manual pump.
The showa LA model is a simple oil manual pump. Distribution of oil is induced by the lever.
|
Showa HLA7 manual pump.
The showa HLA7 model has a variable dispensing volume of 1cc/stroke to 7cc/stroke which can be adjusted.
|
Showa LD manual pump.
The showa LD manual pump dispenses oil after the handle has been pulled and released.
|
Showa A manual pump.
The oil is distributed by a single pull and release of the handle. This lubrication pumps has a squared flange to mount in any kind of reservoir. Different dispensing volumes can be selected.
|
Showa BM manual pump.
The oil is distributed by a single pull and release of the handle. This lubrication pumps has a rounded flange to mount in any kind of reservoir.
|
Showa FA manual pump.
This showa model uses the A pump which is assembled in a 2 liter plastic tank.
|
Showa EA8 manual pump.
The oil is distributing by a single pull and release of the handle. This pump can be mounted in the left or in the right in relation of machine.
|
Showa EA3 manual pump.
The smallest oil pump with a plastic tank of 140 cc. Functioning is the same as the other models.
|
Showa VA valve.
VA valves are flow adjustable resistance type distribution junctions. This type has distribution valves in each side of the main chamber.
|
Showa VB valve.
VB valves are flow adjustable resistance type distribution junctions. This type has distribution valves in one side of the main chamber.
|
Showa Proper Unit P.
Flow proper units are to be installed within a resistant type lubrication system utilizing the intermittent and cyclic distribution method.
|
Showa Continuous Unit C.
Continuous units can be used for either the resistant type system utilizing the continuous distribution method or in grease distribution systems.
|
