LGB 2-JAW PARALLEL GRIPPERS Full Description ● Gripping force: 0.078-0.98N ● Stroke per jaw: 3-8 MM ● Types: LGB12-LGB32 ● Cam design, can directly install sensor outside the gripper. ● Small size: Ensure minimum interference while operating. ● Can be used with an external mechanical SDV pressure safety valve to ensure that the…
RGN CLASSIC 2-JAW PARALLEL GRIPPERS Full Description ● Gripping force: 170-15250N ● Stroke per jaw: 4-30MM ● Types: RGN+50 – RGN+300 ● Recom. workpiece weight: 0.85-75KG ● Max. finger length: 400MM, Repeatability: 0.03MM, won’t deform ● Aluminum shield can be applied to enhance the IP rating ● Slide made of sturdy T-slot, can…
2-Jaw Parallel Grippers RGN CLASSIC 2-JAW PARALLEL GRIPPERS LGB 2-JAW PARALLEL GRIPPERS LGC 2-JAW PARALLEL GRIPPERS LGU LONG STROKE 2-JAW PARALLEL GRPPERS LGX LONG STROKE 2-JAW PARALLEL GRIPPERS RLE LONG STROKE 2-JAW PARALLEL GRIPPERS RGK 2-Jaw Parallel Grippers
Takex sensor : Hot Metal detector, Cold metal detector Sensor For Steel industry Takex Sensor ‘s the HMD (Hot Metal Detector) is a photoelectric sensor of the radiation photodetection type of the heat material that detects presence, and detects the position according to the receiving light of the infrared rays (heat ray) radiated from the heat material (scorching…
TAKEX SENSOR – Product for Specific Application Water Detection Sensor GT2(S)-WS Water Detection Sensor F70A-WS This Takex sensor uses the LED of the long wavelength in which the water molecule is absorbed easily. This is the best for transparent liquid detection in a transparent pipe, the fall detection of water and the detection of the state that the object…
TAKEX Sensor controller unit is a small power unit for a photoelectric sensor that builds the power transformer into internally.It is used to obtain not only the power supply but also a big control output of capacity.Also there are timer. PS SERIES – TAKEX Sensor, SEEKA Sensor’s CONTROL UNIT Time delay function is available(PS3F) Relay output and open collector output…
TAKEX Sensor, SEEKA Sensor Color Sensor TAKEX Sensor, SEEKA sensor operate by sensing the reflected light of internal RGB LED (red, green, blue) illuminators and comparing CS-R10the reflected light with the illumination light to derive a high quality, high confidence signal corresponding to the actual color of the object being detected. Variations of this sensor use a Halogen…
TAKEX Sensor, SEEKA Sensor : Mark Sensor TAKEX SEEKA sensor, mark sensor was developed to detect a specific mark, change of color, or other process indication mark or bar. These units are used in the detection of labels on backgrounds, printing systems, etc where color and or height can influence the process operation. The optical axis match is…
TAKEX sensor | SEEKA sensor AC/DC Power Supply Photo Sensor TAKEX Sensor, SEEKA Sensor AC/DC Power photo sensors were developed to make use of the available power and are the majority of models are self-switching between AC and DC and self-regulating from 24 VDC to 240 VAC. AC power allows for a wide range of applications such…
TAKEX Sensor, Takenaka Sensor : Ultrasonic Sensor TAKEX Sensor’s ultrasonic Sensors are non-contacting sensors that use High Frequency sound waves as the detection medium. The time Differential from time sent to time received after being bounced back from the detection object determines the distance from or presence of the object. Ultrasonic sensors are uninfluenced by differences…