Drawing Die 3D Profile Measurement System: bearing length, reduction angle, diameter and ovality, off-setting
DM300 Series is one of the most advanced high accuracy measurement system for drawing dies in wire and cable, die and mold, medical, automotive industries. The drawing die profiler provides all important information you need for your important quality and productivity. The cutting-edge architecture design and algorithm of DM300 drawing die profiler delivers every feature of drawing die OEM expecting, and performs the fastest measurement performance and unmatched feature of maintenance free. China is one of the largest drawing die manufacturing country, SCreate is proudly the most trusted brand of drawing die measurement, almost all of the players select SCreate and SCreate helps them stands on strong competition to deliver good quality products to worldwide.
Low Noise CMOS Sensor Integrated with high resolution CMOS for leading optical imaging performance.
Japan No.1 positioning worm gear High accuracy positioning performance and long durability.
Durability Exclusively design for insensitive to dirt and environment temperature change.
▪ Advanced overloaded oil sealed turntable to eliminate routine maintenance.
▪ Self-calibration of light source for long and reliable performance.
▪ Software running on the machine, only a desktop application runs on computer, which provies tolerance to computer failure.
The profile of drawing die be read and displayed on monitor with the visualized image.
No computer skill required Our software is designed easy to operate, no training required.
Just feed the die and click mouse, then get the results displaying.
Data management Max. 20,000 measurement records could be stored in system and exported in txt or excel files.
Printable Click to print records, reports directly from the system.
|Objective||Profile in 2D(mm.)||Profile in 2D(inch)||Profile in 3D(mm.)||Profile in 3D(inch.)|
|10 x||0.035 - 0.450||0.0014 - 0.0177||0.035 - 0.110||0.0014-0.0043|
|3 x||0.110 - 1.60||0.0044 - 0.0629||0.110 - 0.800||0.0043-0.0315|
|1 x||0.350 - 5.00||0.0138 - 0.1969||0.400 - 4.500||0.0157-0.1772|
|0.5 x||0.700 - 10.0||0.0276 - 0.3937||0.800- 9.000||0.0315-0.3543|
Note 1：Different objective corresponds to different measurement range, customers can choose according to need.
Note 2：A machine can be installed max. 3 objectives；
Note 3：Profile in 2D measures：diameter & ovality； Profile in 3D measures：Reduction Angle, Bearing length,Diameter,ovality,Off-angle-X,Off-angle-Y；
|Objective||20 x||10 x||4 x||3 x||1 x||0.5 x||0.25 x||0.1 x|
|2D accuracy (mm）||±0.0004||± 0.0006||±0.0008||± 0.0009||± 0.0012||± 0.0024||±0.005||±0.010|
|2D accuracy (inch）||±0.000016||± 0.000024||±0.000031||± 0.000035||± 0.000047||± 0.000094||±0.000197||±0.000393|
|1D Bearing length||±8%||±5%||±4%|
|Reduce Cone Angle||±2°||±1°||±0.5°|
Note4：The repeatability is typically 3-5 times better than the accuracy；
Note5：The accuracy is valid for bearing length smaller than 70% of the diameter;
Note6：Reduce Cone Angle between2° - 34° effectively；
|Maximum OD of Die||
|Maximum Hight of Die||32mm|
|Maximum Weight of Die||0.5kg|
|Information in Report||Diameter, Ovality, Bearing Length, Reduction Angle, Offsetting|
|Measuring Records||Automatically save to max. 20,000 copies, support to export in formats of Excel or TXT|
|Light Source Calibration||yes|
|Input||24 VDC @ 5A|
|Data Interface||USB3.0 (Compatible with USB2.0)|
COPYRIGHT 2019_TJ SOLUTION CO.,LTD.
2D drawing die measurement (DM100)
Handheld Laser micrometer